PROCESSING AID MASTERBATCH IM-PPA15


processing aids masterbatch
PROCESSING AID MASTERBATCH IM-PPA15

Component and Physical Property

Items Method of experiment Unit Standard
Base carrier LLDPE
MI (190oC/2.16kgs) ASTM D1238 g/10 mins 20
Melt Temperature DSC oC 100-120
Bulk density ASTM D1895 g/cm3 0.97
Water Content ASTM D570 ppm < 1000

Method

Time (h) Addition rate Time (h) Addition rate (%)
1-2 5% 3-5 2%
2-3 3% After 5 0.5-2%

Properties:

Additives : Processing aid

Processing temperature : 150 – 320 (oC)

Applicate rate : 0.5-5 %

Pellet Size : 3×3 (±0.3) mm

Carrier resin : PE

Compatibility :  PE, PP

Packing : 25 kgs per PP bag

Storage : Keep at dry condition

Shetf  Life: 18 month

 

PRODUCT INFORMATION

This product contains: PPA additive and  resin. It’s suitable for cast film, extrusion blow, tube, injection molding. It will bring the end product with more glossy, smooth surface.

  • Elimination of melt fracture (shark-skin effect)
  • Reduction of die build-up
  • Improvement of the surface finish with high gloss levels
  • Faster production start-up
  • Pressure reduction
  • Higher output at constant die pressure and temperature
  • Lower energy consumption
Comment

RELATED PRODUCTS

COMPOUND RESIN CP-HDPE30
General Description  CP-HDPE30 is a type of compound resin containing super fine Calcium Carbonate powder, Polyethylene virgin resin and other additives. It is used directly...
COMPOUND RESIN CP-HIPS30
General Description  CP-HIPS30 is a type of compound resin containing super fine Calcium Carbonate powder, HIPS virgin resin and other additives. It is used directly to cast...
COMPOUND RESIN CP-PE30
General Description  CP-PE30 is a type of compound resin containing super fine Calcium Carbonate powder, Polyethylene virgin resin and other additives. It is used directly to...
BIOPOLYMER IC-I9621
General Description  IC-I9621 is a biodegradable polymer that may use for injection molding producing heat-resistant articles, such as cutlery, trays, cups, baby toys,...
Top
× How can I help you?